IKING CNC stud welding machine is an automatic stud welding system built on a square steel bracket for stable high-speed motion. Servo-driven XY travel, pneumatic Z axis, bilingual touch screen control and automatic feeding handle M3-M8 studs on sheet metal, cabinets and fabricated panels.
A CNC stud welding machine automates the placement and welding of studs onto sheet metal, cabinet panels and fabricated frames. The servo-driven gantry moves the welding head along programmed paths, while the automatic feeding system presents studs of up to three different specifications in one cycle, so operators do not place each fastener by hand.
Built on a square steel bracket that stays rigid at high speed, this CNC stud welder combines capacitor discharge welding, touch screen control and teach-program operation for repeatable fastening with a small weld mark and minimal distortion on the parent sheet.
Square steel bracket resists deflection and vibration during high-speed gantry travel, keeping the welding head aligned to the programmed path.
Absolute-value servo motors drive the axes with TBI screw and guide; maximum movement speed reaches 30 m/min with stable repeat positioning.
The feeding system presents studs automatically, supporting one-time welding of 1-3 stud specifications without manual reloading between cycles.
| Model | IK-LM-CN1325-1 |
| Effective stroke | 1300 x 2500 x 130 mm |
| Overall size | 2500 x 3950 x 1750 mm |
| CD welder | SSR-3150, 1 unit |
| Automatic gun / feeder | 1 set automatic gun, 1 set automatic feeding system |
| Drive motor | HC1301 absolute-value servo motor, 1300W / 750W |
| Servo system | IKING |
| Max movement speed | 30 m/min |
| Repeat positioning accuracy | ±0.02 mm |
| Screw / guide | Taiwan TBI |
| Lubricator | Sanlang manual lubricator |
| Power supply | Single phase, 50/60 Hz, 220 VAC; other voltages available |
| Total power | 2.05 kW + welding machine |
| Capacitance capacity | 132,000 μF |
| Ring sensor / cylinder | Daochuan ring type sensor; Airtac cylinder |
| Pneumatic / electrical parts | Prostar, Airtac pneumatic; Schneider electrical |
Import G-code, use the teach function or store a saved program; up to 1000 files can be held in the machine memory.
The automatic feeder presents the selected studs; up to three specifications can be welded in the same batch without manual changeover.
Capacitor energy discharges through the stud end, fusing it to the sheet at high speed (900-1500 studs/hour) with a small mark and little back-side damage.
The automatic CD stud welding machine is used where studs must be fixed in regular patterns onto thin or medium sheet and fabricated panels:
The standard range covers M3-M8 studs with length 6-35 mm; studs outside this range can be discussed for custom configuration.
The machine reaches about 900-1500 studs per hour depending on stud size, material and panel layout, with up to three stud specifications handled in one batch.
Carbon steel, stainless steel, aluminium and copper studs can be welded; confirm the parent sheet material and stud grade before ordering.
Yes. Programs can be imported via G-code, taught on the machine or recalled from saved files, and the memory stores up to 1000 programs for repeat production.
Send the stud diameter and length, material, panel thickness, pattern layout and daily output. We will confirm the matching model, configuration and lead time.
Request a quotation