HOME PRODUCT Drawn Arc Stud Welding Machine IKING Thyristor Drawn Arc Shear Stud Welding Machine

PRODUCT

IKING Thyristor Drawn Arc Shear Stud Welding Machine
IKING Thyristor Drawn Arc Shear Stud Welding Machine IKING Thyristor Drawn Arc Shear Stud Welding Machine IKING Thyristor Drawn Arc Shear Stud Welding Machine IKING Thyristor Drawn Arc Shear Stud Welding Machine IKING Thyristor Drawn Arc Shear Stud Welding Machine

IKING Thyristor Drawn Arc Shear Stud Welding Machine

Product ID : ST-3150
Product Tags :
Product Attributes :

The ST-3150 shear stud welding machine is a heavy-duty, cabinet-type thyristor drawn arc stud welder engineered for large-diameter shear connectors and studs. It reliably fuses mild steel and stainless steel studs from 10 to 28 mm onto steel plates.

Driven by a full-bridge silicon controlled rectifier (SCR) main circuit under precise microprocessor control, this 350 kg unit operates on a stable 3-phase 380 V power supply. It is widely applied across heavy-duty industrial sectors, including steel structures, bridge construction, railway fabrication, and plant platforms.

Equipped with preset current and time controls in fine steps, the ST-3150 ensures consistent weld quality throughout the shift and features built-in safety protection against repeat welding at the same spot. It pairs seamlessly with SNQ7B or SNQ9 heavy-duty welding guns.

Product Description

The ST-3150 thyristor drawn arc stud welding machine is a cabinet-type stud welder for larger shear studs. It fuses mild steel and stainless steel studs from 10 to 28 mm onto steel plate, using a full-bridge silicon controlled rectifier main circuit under micro-processor control. The 350 kg unit sits on four casters and runs on a 3-phase 380 V supply, which is the kind of power supply used on steel structure, bridge and railway fabrication sites.

Stud range
10–28 mm
mild steel and stainless studs
Max. current
3150 A
regulated 200–3150 A
Input
3-phase 380 V
50/60 Hz, ±10%
Weight
350 kg
1060 × 590 × 740 mm, on casters

Machine Overview

ST-3150 thyristor stud welding machine with drawn arc stud welding gun welding a shear stud to steel plate
ST-3150 thyristor drawn arc stud welder on the shop floor, gun held against the plate before the arc fires.
ST series thyristor stud welding cabinet layout with front panel, weld sockets and cooling grille
ST series cabinet layout: control panel, twist-and-lock weld sockets and air cooling grille.
1
Where it is used

Drawn arc stud welding for steel structure, bridge girders, railway works and plant platforms, where larger shear studs are fixed to the main plate before concrete is poured.

2
Settings you can preset

Welding current and weld time are preset on the panel and shown on the digital displays. Time sets in 0.01 s steps and current in 1 A steps, so the same stud repeats the same weld through the shift.

3
Protection and duty cycle

The unit locks against repeat welding at one spot and has short-circuit and circuit-breaker protection. Air cooling keeps the cabinet going through continuous site duty, and the fault resets once the cause is cleared.

Studs Welded to the Plate

Drawn arc shear studs welded in a row onto a steel plate with the ST-3150 stud welder gun
Gun and ferruled studs on the test plate; each stud fuses to the plate under a ceramic ferrule that holds the arc.
Process

The gun lifts the stud to start the arc, the ferrule confines the molten pool, and the stud is plunged back into the plate once the face has fused. The ferrule is knocked off after cooling.

Result

The root carries a full ring of fillet around the shank, and the stud stands vertical on the plate. Weld speed reaches about 15 pcs/min on 22 mm studs and 20 pcs/min on 13 mm studs.

Materials

Mild steel shear studs and stainless studs can be welded to steel plate on this unit; stud chuck and ferrule holder sets are exchanged with the stud size.

Close-up of welded shear stud heads on steel plate with broken ceramic ferrule remains
Welded stud heads after the ferrule is removed; the broken ceramic pieces are cleaned off the plate after welding.
Panel and sockets

Digital displays show current, voltage and weld time; setting knobs sit beside them. Gun, control and earth leads lock into twist-and-lock sockets on the lower front panel, with a circuit breaker and air cooling behind the grille.

Moving the unit

Two lockable universal casters and two fixed wheels carry the 350 kg cabinet around the site; two lifting rings on the top take a crane or hoist when loading onto a truck.

Specifications – ST-3150

Item ST-3150
Stud diameter range 10–28 mm
Max. output current 3150 A
Regulated output 200–3150 A
Timing control 100–2800 ms
Max. weld speed 15 pcs/min on 22 mm studs; 20 pcs/min on 13 mm studs
Main circuit Full-bridge silicon controlled rectifier (thyristor)
Control circuit Micro-processor controlled
Repeat cycle lock Automatic protection against repeat welding at one spot
Input voltage 3-phase 380 V (±10%), 50/60 Hz; other voltages on request
Power cable 1 core 16 mm² + 3 cores 35 mm²
Max. extension weld cable 100 m
Max. extension earth lead 20 m
Protection class IP23
Dimensions (L×W×D) 1060 × 590 × 740 mm
Net weight 350 kg
Casters and wheels 2 lockable universal casters + 2 fixed wheels
Handle and lifting ring Handle fitted; 2 lifting rings
Standard gun SNQ7B / SNQ9

What Ships With the Machine

In the set

• 1 welding gun, SNQ7B or SNQ9

• 5 m ground wire with 1 ground clamp

• 10 m welding cables

• 4 sets of stud chucks and ferrule holders

• Hook spanner

• Operation documents

Consumables to match

Stud chucks and ferrule holders are chosen by the stud diameter and the gun model. Ceramic ferrules and spare nozzles are listed under accessories.

Shear studs and drawn arc weld studs for this machine are listed under shear connectors and drawn arc weld studs.

Where This Unit Is Used

Steel structure

Floor slabs and composite decks on steel beams, where shear studs transfer the shear force between steel and concrete.

Bridges and girders

Shear connectors on bridge girders and deck plates, welded along the girder before the concrete deck is cast.

Railway and plant platforms

Railway structures, industrial platforms and equipment bases, where larger studs are fixed to heavy plate on site.

FAQ

What stud sizes does the ST-3150 weld?

10 to 28 mm diameter mild steel and stainless shear studs. The chuck and ferrule holder set changes with the stud size; the gun model is SNQ7B or SNQ9.

What supply does it need?

3-phase 380 V, 50/60 Hz, within ±10%. Other supply voltages can be built to order; tell us your local voltage and frequency when enquiring.

How far can the cables run?

The weld cable extension reaches 100 m and the earth lead 20 m, which covers a spread-out girder line or a large platform without relocating the cabinet.

Can it weld stainless studs?

Yes, stainless steel studs are within the stated range. Weld current and time are preset for the stud material and plate thickness; send those details with the enquiry.

Need the ST-3150 with studs and ferrules on one quote?

Send the stud diameter, plate thickness, quantity and destination port. We will come back with the machine setting, stud size, packing weight and lead time.

Request a quotation
Online Inquiry